Best Fishing Pliers Review 2022: A Must Have Fishing Tool

Lance Wilkins
Lance Wilkins
Editor @ CallOutdoors. Outdoor gear-head and adventure addict. I fish, camp and enjoy to writing about my adventures.

Share

One fishing tool every angler should have is a good pair of fishing pliers.

Fishing pliers make tasks like pulling out hooks from fish, opening split rings, crimping and cutting lines light work.

Without fishing pliers, you not only risk cutting your hands but you’re likely to end up rigging your baits poorly which can end up in lost fish and fishing equipment.

Finding a good pair of fishing pliers isn’t easy.

I went through about 50 pairs of fishing pliers in my life until I found the best fishing pliers for me.

But unlike you, I didn’t find a handy article like this that would help me find the best fishing pliers around off the bat.

The Best Fishing Pliers From The Review

Before we head to the full lineup, here are the best fishing pliers from the review sorted by category.

Top Pick

Van Staal Titanium Fishing Pliers

Made from 100% titanium making them about as durable as can be and they will outlast any aluminum or stainless steel fishing pliers.

Van Staal Titanium Fishing Pliers

The best fishing pliers are the Van Staal Titanium Pliers.

These will outlast most pliers due to their titanium build and will giggle when saltwater tries to corrode them, they are that tough.

They also come with excellent cutters for all lines and a top quality leather sheath for storage.

Best Fishing Pliers For The Money

Penn Saltwater Fishing Bull Nose Pliers

These pliers are tough and will survive life at sea with ease thanks to being made of titanium coated stainless steel.

Penn Saltwater Fishing Bull Nose Pliers

The best fishing pliers for the money are the Penn Saltwater Fishing Pliers.

They are tough, have great bending power, can be used in any environment, cut through all lines with ease, and have comfortable non-slip handles.

They are also exceptionally affordable, especially for the quality you’re getting.

Best Saltwater Fishing Pliers

Bubba Blade Fishing Pliers

Great pair of saltwater fishing pliers thanks to the high-quality corrosion-resistant materials and helpful fishing features.

Bubba Blade Fishing Pliers

The best fishing pliers for saltwater are the Bubba Blade Fishing Pliers.

These pliers are durable, made to handle corrosion, cut anything from braid to mono, and have a crimping tool built into their nose for saltwater rigging.

They are also comfortable to use thanks to the soft grippy handles.

Best Fishing Split Ring Pliers

Plussino Fishing Pliers

These pliers resemble multi-tools to an extent thanks to their 4 functions and are a great fishing tool to have in your tackle box.

Plussino Fishing Pliers

The best fishing pliers with a split ring tool are the Plussino Split Ring Fishing Pliers.

These split ring pliers are durable, corrosion-resistant, open big or small split rings with ease, have great line cutters, and a crimping tool too.

These split ring pliers cover you from every angle from hook removal to all kinds of rigging you might need to do.

Our Top Fishing Pliers

Here are the full reviews of all the best fishing pliers in our list…

Best Saltwater Fishing Pliers

Bubba Blade Fishing Pliers

Great pair of saltwater fishing pliers thanks to its high-quality corrosion-resistant materials and helpful fishing features.

Bubba Blade Fishing Pliers

The best fishing pliers for saltwater. The Bubba Blade Fishing Pliers are a great pair of saltwater fishing pliers thanks to the high-quality corrosion-resistant materials the pliers are made from and their design.

Build

This pair of fishing pliers are made with a stainless steel body with a titanium nitride coating that stops any kind of corrosion from setting into the pliers.

Being made from stainless steel, the pliers are also tough and have an excellent amount of bending power for when you need to crimp or bend small hooks back into shape.

Design

The jaws on these fishing pliers are serrated to give you a solid grip for hook removals and also feature a 3 set crimping tool so you can use them to rig your baits.

You’ll also find a set of tungsten carbide line cutters that are super sharp and make light work of cutting through braided lines and mono with ease.

Power

These saltwater pliers are spring-loaded and pop open automatically making any fishing tasks easier, as you only have to focus on the closing side of things and can use them one-handed.

Handle

The handle on these saltwater pliers is soft, grippy, and comfortable to use.

You can apply a lot of squeezing pressure without feeling any pain in the palm of your hands.

Another great thing about these fishing pliers is that the jaws and cutters are replaceable, so if they dull or get damaged you can simply swap them out for a fresh set.

Sheath

The only downside to these best fishing pliers is that the included nylon sheath does fray in a few months of heavy use, and the pliers can bend under too much pressure if you push them too far, but that’s the case with most pliers.

Specs

  • Type: Crimp and Cutters
  • Material: Titanium nitride and stainless steel
  • Length: 8.5 inches
  • Side Cutter: Yes
  • Sheath: Yes

Pros

  • Cuts mono, wire, and braid with ease
  • 3 set crimping tool on the nose
  • Separate side cutters for quick fishing line cutting
  • Durable long-lasting build
  • Made with corrosion-resistant materials
  • Grippy durable handle
  • Comfortable and easy to use
  • Comes with a nylon sheath and lanyard
  • Cutters and jaws are replaceable
  • Good for freshwater and saltwater use

Cons

  • Can bend under a lot of pressure
  • The sheath can fray quite easily

Gerber Magniplier Fishing Pliers

Made from high-quality aircraft-grade aluminum making it both light and exceptionally good at standing up to corrosion.

Gerber Magniplier Fishing Pliers

The Gerber Magniplier Fishing Pliers are made from high-quality aircraft-grade aluminum making them both light and exceptionally good at standing up to corrosion.

This pair of aircraft-grade aluminum needle nose pliers are also coated with Gerbers own SATLRx coating that blocks any corrosion from trying to get into the aluminum.

Design

This pair of fishing pliers come with a long nose and serrated jaws that not only grip well to anything the pliers hold but also give you extra length making deep set hook removals a lot easier.

The jaws on these needle nose pliers are spring-loaded and are also angled off-axis to give you better view and more control.

This means when looking to remove a deeply embedded hook with these aluminum needle nose pliers, your hand won’t be blocking the view of where the nose is, so you can find the hook and remove it quickly and easily.

Cutters

On the side of these aluminum fishing pliers are some tungsten cutters.

The line cutters are super sharp and will cut through any fishing line, braided lines, and mono cleanly without leaving any frayed edges.

Power

These aluminum needle nose pliers are spring-loaded for ease of use and come with an ergonomic handle that makes cutting and squeezing comfortable.

These needle nose pliers also have a locking mechanism so that when stored they stay closed and don’t open and get stuck in the included sheath. It also includes a coiled lanyard.

Maintenance

Both the jaws and line cutters on this pair of pliers are replaceable, so if they get damaged or become dull, you can swap them out for a fresh set.

The only negative to these aluminum fishing pliers is the sheath they come with.

It tends to fray quite fast and it holds water when wet, keeping the pliers surrounded by possibly corrosive freshwater and saltwater when stored.

Specs

  • Type: Needle Nose pliers
  • Material: Anodized aircraft-grade aluminum and SALTRx coating
  • Length: 7.5 inches
  • Side Cutter: Yes
  • Sheath: Yes and coiled lanyard

Pros

  • Durable and well made
  • SALTRx coating makes them super corrosion-resistant
  • The longnose design makes it easy to remove hooks
  • Side cutters cut all fishing line including braided lines
  • Replaceable jaw tips and cutters
  • Angled off-axis for better control
  • Sheath attaches to your belt with ease
  • Locking mechanism to keep them closed when stored
  • Comfy in your hand

Cons

  • Poor quality sheath that holds water

KastKing Speed Demon Pro Fishing Pliers

Made from Teflon coated stainless steel that does a pretty good job of blocking corrosion and standing up well to heavy fishing tasks like bending wire or removing hooks.

KastKing Speed Demon Pro Fishing Pliers

The KastKing Speed Demon Pro Fishing Pliers are more of a fishing tool than anything.

They feature a split ring tool, a crimping tool, plus hook and lure holds on the outside of the jaws that make rigging easier.

Build

These split ring pliers are made from Teflon coated stainless steel that does a pretty good job of blocking corrosion and standing up well to heavy fishing tasks like bending wire or removing hooks.

Design

The corrosion-resistant stainless steel jaws come with a split ring tip that allows you to open up any split ring on lures so you can add and remove hooks to them with ease.

The spring-loaded jaws also come with a crimping tool for 3 sizes and tungsten carbide cutters on the side.

Cutters

The tungsten carbide cutters are easy to use in a hurry, and cut through all lines, including braid, with ease.

The line cutters and jaws are also replaceable on these pliers so you can swap them out once they become dull or if they get damaged over time.

Handles

The handles on this pair of fishing pliers are made from a SuperPolymer.

They are soft, grippy, and make using the pliers comfortable and easy.

There are quite a few downsides to this pair of pliers.

The handles tend to slide and can fall off

Hook Holds

The hook holds are small and probably only small hooks that flies have in fly fishing.

They also rust quite quickly in saltwater and are probably best used as freshwater pliers.

Specs

  • Type: Split Ring and Crimping
  • Material:420 Stainless Steel and Teflon coating
  • Length: 7.5 and 8.5 inches
  • Side Cutter: Yes
  • Sheath: Yes and coiled lanyard

Pros

  • Durable and well made
  • Teflon coated stainless steel blocks corrosion well
  • Cuts braid, wire, mono
  • Split ring tip tool for rigging lures
  • Crimping tool on the jaws
  • Comfortable durable handles
  • Holes and notches on the side for tightening knots to hooks and lures
  • Strong and bend hooks easily

Cons

  • Rust easily in saltwater
  • Handles can fall off
  • Hook holds are small

Best Fishing Pliers For The Money

Penn Saltwater Fishing Bull Nose Pliers

These pliers are tough and will survive life at sea with ease thanks to being made of titanium coated stainless steel.

Penn Saltwater Fishing Bull Nose Pliers

This is the best fishing pliers for the money.

The Penn Saltwater Fishing Pliers are tough and will survive life at sea with ease thanks to being made of titanium coated stainless steel.

Build

The stainless steel fishing pliers is premium grade and blocks corrosion on its own and with the addition of a titanium coating, makes a pair of fishing pliers that laughs in the face of saltwater.

The corrosion-resistant stainless steel jaws on these saltwater fishing pliers are serrated so you can grip and remove hooks with ease.

The thick build on these quality fishing pliers also gives them excellent bending power and you can exert a lot of pf pressure with the pliers without worry.

Hook Holds

Along the stainless steel jaws are two large hook holds that are there to make cinching knots a lot easier.

They are wide enough for large hooks and make tightening up your rigging a breeze.

Line Cutters

On the side, you’ll find some tungsten carbide line cutters.

The tungsten carbide blades are razor sharp and cut everything from braid to wire cleanly, leaving no frayed edges behind.

The cutters are also replaceable so you can swap them out when dull.

Handle

This pair of pliers come with an ergonomic non-slip handle that is soft and comfortable to hold.

The handle materials stand up well to heat and moisture, and you won’t find them slipping off the pliers at all.

Design

The only drawback to these best fishing pliers for the money is that the nose is a little stubby and you might find it hard to get them inside the mouth of a small fish when you need to pull a hook out which could also damage the fish.

Specs

  • Type: Bull Nose
  • Material: Stainless steel and titanium coating
  • Length: 8 inch
  • Side Cutters: Yes
  • Sheath: Yes

Pros

  • Made from durable and quality materials
  • Titanium coated stainless steel wards off corrosion
  • Grippy comfortable handle
  • Cuts anything from braid to wire
  • Cutters are replaceable
  • Knot cinching feature on the side
  • Good bending power

Cons

  • The nose is a little stubby for hook removal

Best Fishing Split Ring Pliers

Plussino Fishing Pliers

These pliers resemble multi-tools to an extent thanks to their 4 functions and are a great fishing tool to have in your tackle box.

Plussino Fishing Pliers

The Plussino Split Ring Pliers resemble multi-tools to an extent thanks to their 4 functions and are a great fishing tool to have in your tackle box.

The spring-loaded jaws on these can be used one-handed, are serrated for gripping hooks, come with a 3 size crimping tool and a split ring tool.

The crimping tool is ideal for rigging large baits where crimps are involved, and the split ring tool ensures you can open the split rings on lures so you can swap hooks in and out with ease. It also comes with a coiled lanyard so you can access it quickly when needed.

Cutters

These split ring pliers come with tungsten carbide cutters that are found in the jaws instead of on the side. The cutters are super sharp for cutting braid and mono fishing lines, and the tungsten carbide cutters are replaceable, so you can swap them out when they dull down.

Handle

The handles of these split ring pliers are ergonomic to make cutting comfortable and have a textured non-slip grip down them.

The grip of this split ring pliers does well in most citations but when wet and if you’re pulling hard, can be a little slippery.

Build

They are made from high-quality stainless steel with a Teflon coating that is not only tough but corrosion resistant as well.

This makes the split ring pliers ideal for saltwater use and heavy-duty tasks too thanks to the thick stainless steel.

Design

The one major downside to these saltwater fishing pliers is that the tungsten carbide cutters are found in the stainless steel jaws instead of on the side.

This makes cutting the line a little harder, as you have to work the line through the long jaws to get to the cutters rather than just snipping the line on the side.

Specs

  • Type: Split-ring Crimpers
  • Material: Stainless Steel and Teflon Coating
  • Length: 8 inch
  • Side Cutters: No
  • Sheath: Yes and coiled lanyard

Pros

  • Durable and well made
  • Excellent corrosion resistance for saltwater use
  • 3 size crimping tool on the nose
  • Split ring tool for removing hooks and rigging
  • Cutters cut everything from braid to mono and wire
  • Comfortable non-slip handle
  • Good bending power
  • Cutters and jaw tips are replaceable

Cons

  • Handles are slippery when wet
  • Cutters are inside the jaws instead of on the side

P-Line Adaro Fishing Pliers

Light and very corrosion resistant. Good for fly fishing or other types of fishing where the catch and hooks are not that big.

P-Line Adaro Fishing Pliers

The P-Line Adaro Fishing Pliers are made from high-quality aluminum.

Being made from aluminum makes the pliers light and very corrosion resistant.

Unlike stainless steel, aluminum doesn’t oxidize to form rust, making these aluminum pliers ideal for saltwater.

Durability

Aluminum is, however, not as tough as stainless steel and will bend more easily.

This makes these aluminum fishing pliers better for saltwater fly fishing where your catch is usually smaller than say offshore fishing, and the hooks one uses in fly fishing are smaller too and require left power to remove and rig.

Design

This pair of aluminum fly fishing pliers come with serrated and removable jaws that give great grip for anglers pulling hooks out of their catch.

The aluminum pliers also come with tungsten carbide cutters that cut line and braid with ease.

Features

You’ll find the cutters on the side of the fly fishing pliers for easier line cutting, and you can replace the tungsten carbide cutters when they dull.

Handle

The only downsides to these aluminum fly fishing pliers are that the handles are quite small which makes opening and closing them a little tiring and cumbersome.

Being made of aluminum, they are more likely to bend under pressure than stainless steel fishing pliers and are therefore more suited to lighter forms of fishing like fly fishing.

Specs

  • Rustproof as made with 100% aluminum
  • Lightweight and easy to carry
  • Comfortable ergonomic handle
  • Excellent cutters for line, braid, and mono
  • Cutters and jaws are replaceable
  • Jaws are made from corrosion-resistant coated carbon steel

Pros

  • Rustproof as made with 100% aluminum
  • Lightweight and easy to carry
  • Comfortable ergonomic handle
  • Excellent cutters for line, braid, and mono
  • Cutters and jaws are replaceable
  • Jaws are made from corrosion-resistant coated carbon steel

Cons

  • Handles are quite wide
  • Can bend in heavy use

Top Pick

Van Staal Titanium Fishing Pliers

Made from 100% titanium making them about as durable as can be and they will outlast any aluminum or stainless steel pliers.

Van Staal Titanium Fishing Pliers

For me, this is the best fishing pliers. The Van Staal Titanium Fishing Pliers are made from 100% titanium making them about as durable as can be and they will outlast any aluminum or stainless steel pliers.

But, being titanium pliers they are also a lot more expensive.

Build

They are a little shorter than the other fishing pliers in the review at 6 inches long making them good for intricate tasks as well as pulling the hook from a larger catch too.

The nose on them is also quite thin so you can get it down the mouth for a smaller catch too.

Design

The jaws on them are also titanium and are not replaceable, as they are a part of the full mode.

This means the jaws are lined up and fully bite together without any gaps.

Being made of titanium there will be no need to replace them anyway, as it’s tougher than aluminum and steel.

Features

These durable pliers come with tungsten line cutters.

These line cutters happily snip through mono, wire, and even braid without leaving a frayed edge.

Being on the side, they also make it very easy for anglers to cut lines when compared to having the cutting in the jaws.

There is even a handy line keeper to help anglers keep their lines in the cut zone.

Handle

The handles are ergonomic with finger grips, and when fully squeezed give you a lot of pressure while your hands remain comfortable.

This pair of pliers also gives you superior bending power and won’t bend at all no matter how much pressure you put on them.

Sheath

Anglers will also love that these come with a leather sheath that not only looks nice but doesn’t fray or hold any water that could damage the fishing pliers in the long run.

Specs

  • Type: Shortnose
  • Material: Titanium
  • Length: 6 inches
  • Side Cutters: Yes
  • Sheath: Yes

Pros

  • Outlast most pliers bein made of titanium
  • Durable and long-lasting design
  • Cutters snip through any lines
  • Jaws cinch down tight and are lined straight
  • Powerful for heavy-duty bending
  • Comfortable handle and easy to use
  • Good size for all size fish
  • Good looking leather sheath
  • Line keeper to keep the line in the cut zone

Cons

  • A little expensive

What are fishing pliers?

built with fishing environments and tasks in mind…

Fishing pliers are like regular pliers in their shape and mechanism but they are built with fishing environments and tasks in mind.

Unlike normal pliers, fishing pliers don’t sit in a garage or a toolbox.

They are out on the water and at sea and are built to survive daily contact with corrosive elements like saltwater.

They also have useful tools on them for fishing like line cutters, split ring and crimping tools making rigging lures, and other fishing tasks like tying knots a lot easier.

Why buy fishing pliers?

Removing Fish Hook from a Carp
Removing Fish Hook from a Carp

Why consider buying fishing pliers?

One of the main reasons to buy some fishing pliers is hook removal.

Species like pike and wahoo have incredibly sharp teeth and removing hooks from their mouths by hand is not a good idea, as the sharp teeth will pull your flesh off like a hot knife through butter.

Deep Hooks

Hooks can also find their way deep into a fish’s throat, and the only way to safely remove a deeply embedded hook without harming fish is to use some long pliers, rather than sticking your hand down there which would damage the fish considerably or expose you to the fish’s sharp teeth.

Other Tasks

Outside of hook removal, they also come in handy for all kinds of tasks like cutting lines, wire, crimping leaders, opening big or small split rings, and if you need them, they can even help you fix your engine.

How to choose the right fishing pliers for you

Choosing the right fishing pliers comes down to two things, material and purpose.

The material the pliers are made out of needs to be able to handle not only the environment you intend to use them in but the tasks you have in store for them.

Target Fish

If you’re going to fish in saltwater, your pliers need to have some corrosion-resistance so they don’t seize with rust after a few days out on the sea.

If you plan on removing a large hook from big fish like tuna or marlin, the pliers also need a solid enough build with enough bending power to manage it.

Features

Next up are the tools you need the pliers to have.

If you’re a fly fisherman, for example, all you need them for is to cut fishing lines and remove a hook or two.

But if you’re a spin and/or offshore fisherman, you’ll need a split-ring end to change the hook on your fishing lures and a crimping tool to rig the leaders on your large fishing lures.

Things to consider before buying fishing pliers

Removing Fish Hook from a Carp
Close Up of Fishing Pliers Held in Hand

Materials

When buying fishing pliers, one of the first things to consider is the material. All the pliers in the review are designed to stop corrosion and are made from either aluminum, coated stainless steel, or titanium. Some of the materials are better than others, and here’s why.

Coated Stainless Steel

Coated stainless steel is tough and has great bending power, more than aluminum but it is more at risk of corrosion than aluminum and titanium.

It depends on the quality of the steel and the type of coating.

Corrosion Resistance

Top-quality stainless with a titanium coating for example will take a while to show any corrosion if uncared for.

Whereas, standard quality stainless with a Teflon coating will oxidize much faster.

TIP

If you need the bending power of stainless, you should check its quality and coating to ensure it can handle saltwater.

Aluminum

Aluminum is light and resists corrosion exceptionally well.

The only negative to it is that it is much weaker than steel or titanium.

This means that aluminum pliers will bend more easily when put under a lot of pressure so they are not the best choice for heavy work like you’d find in offshore fishing, and are better suited to lighter fishing situations like fly fishing.

Titanium

Titanium is lighter than steel but heavier than aluminum, it’s also stronger and more expensive than both of them and better at handling corrosion.

If you’re looking to invest in some pliers for life, you can’t go wrong with titanium.

It has the best power, to weight, to corrosion-resistance ratio out there, but you have to pay for it.

Check out the best fishing pliers from the list, the Van Staal Titanium Pliers which are made from 100% titanium.

Van Staal Titanium Pliers – J&H Tackle

Tools

Once you have decided on the material you’d like your pliers to be made from, you should figure out which tools you want them to have too.

Cutters

All the pliers in the review come with line cutters, and all the cutters can snip all lines cleanly, including braid.

Not all pliers can cut the braid cleanly, and this is something to look out for.

Something else to consider is where the cutters are placed. Most fishing pliers have cutters on the side, while others have them in the jaw.

TIP

I prefer the cutters to be on the side as they are more accessible and easier to cut lines with, but some fishermen prefer them to be in the jaw, the choice is up to you.

Crimping

If you use heavy tackle, like 100-400 lbs mono leaders for marlin, you’re going to want to crimp those connections to ensure you don’t lose any fish you hook.

Having a crimping tool on your pliers is useful in this scenario but most fishermen out there probably won’t need them.

Split Ring

Split rings are that ring you find on lures that connect the body to the hook, they are a mini version of the split ring you’d find on a key ring.

Removing a hook from a split ring is impossible without the tool that wedges in there and opens it. This is where split ring pliers come in handy!

TIP

If you fish with lures often, you’re going to want some pliers that can open a split ring.

Use of split ring pliers

Say there is one lure that’s working on a given day, it’s all the fish will eat, but because it’s been hit so many times, the hook is bent and needs replacing.

Without some split ring fishing pliers to change the hook, your day is pretty much over.

Are the tools replaceable?

Removing Fish Hook from a Carp
Fishing Pliers on Top of a Fly Rod

You’ll notice that on a lot of the pliers in the review, the jaw and cutters are replaceable, and I’d highly recommend choosing some pliers with this feature.

The jaw and cutters do all of the work and they will get damaged and dulled before the body wears out.

If they are replaceable, you can swap in a new set and give a new lease of life to your pliers.

Grip

Grip can be looked at from two angles.

One is your grip on the handle and the other is the pliers’ grip on whatever you’re using them to hold on to, and both are important.

  • Make sure the pliers come with handles with ergonomic notches for your fingers or come with soft, textured rubberized grips that give you a solid hold on them.
  • When it comes to the pliers’ grip, look for a serrated jaw and whether the pliers close fully, jaw to jaw, and are lined up straight when they do so.

If the pliers tick these boxes you are on to a winner.

Sheath & Lanyard

Most fishing pliers come with a sheath and a lanyard.

When fishing, you’ll want your pliers to be readily available, not hiding in your bag.

I wear mine on my belt, so at any moment I can hold a fish in one hand, grab my pliers with the other, and quickly take the hook out and let the fish go.

See the Bubba Blade Fishing Pliers that come with a handy sheath below…

Bubba Blade Pliers Review

Sheaths

Not all sheaths are made the same though, and you may find yourself having to buy a separate one if the included sheath wears out fast.

Sheaths made from poor quality nylon, for example, fray quickly and you’ll find your pliers pushing through them eventually.

Quick Dry

They also don’t dry when wet and keep your pliers sitting in a damp soaking of corrosive water.

The best material for a sheath is leather or plastic.

TIP

These materials dry quickly or don’t hold water at all, and they are far more durable than nylon.

Lanyards

Most included lanyards are coiled which is handy as you get some extra length without having the lanyard hanging around your knees with the potential to tangle up in things.

If you don’t get a lanyard with your pliers, I’d highly recommend buying one or fashioning one out of thick line or fly line.

TIP

Pliers can fall out of your hands, especially with a shaking fish on the other end, but with a lanyard, you’ll never lose them.

Summing Up

I hope you found the article useful and have managed to pick the best pliers for your needs.

Remember that it comes down to long-lasting materials first, and then all the functions you need after that.

There is no point in owning something that does everything you need but then fails due to the poor foundations it was built on.

If you still haven’t quite made up your mind, here are the three I would choose and for different reasons.

Top Pick

This is the best titanium fishing pliers. If you’re looking for one pair of pliers for the rest of your life then the Van Staal Pliers are the way to go.

They are the most expensive pliers in the review but being made from titanium means that they will never rust and they are about as tough as pliers can get.

Best Fishing Pliers For The Money

For any fly fishermen reading this, I’d recommend the Penn Saltwater Fishing Pliers.

The pliers are tough, comfortable to use, cut through all lines with ease, and very affordable for their quality.

Best Saltwater Fishing Pliers

Any offshore fishermen should go for the Bubba Blade Pliers.

These pliers are tough, have great bending power for heavy offshore tasks, the cutters are razor-sharp, and you can use them to crimp your lines down when rigging for that monster marling or tuna.

They are also made from great materials that will not rust.

Feel Free To Share

Thanks for reading my article, I hope you enjoyed it.

Please share it around with your friends and fishing friends, and anyone who’s looking for some good pliers.

If you found it useful, have a look at some of my other articles too, I cover everything from rods to reels and trolling motor batteries. If you need something new for fishing, we have researched and written about it.

In case you need a tackle box for your fishing equipment, this Best Fishing Tackle Box review is worth checking out.

Share

Lance Wilkins
Lance Wilkins
Editor @ CallOutdoors. Outdoor gear-head and adventure addict. I fish, camp and enjoy to writing about my adventures.
New Course: Casting Mastery Blueprint!
Longer, more accurate casting in just 10 days!